Place the four provided screws (and washers) through the chain and screw
into the slats from the outside at the provided pilot holes.
If needed, using a pair of pliers or similar tool,
bend the chain slightly around the screws / washers, to prevent the chain from slipping off.
Take the hooks and secure to your mounting surface. (I.e. beams or studs)...
Hang the unit and adjust as need to achieve a level platform.
IMPORTANT:
Once you have achieved your final positioning,
if needed, loosely bend the hooks closed around the chains
and also MAKE SURE you did slightly BEND the chain
(at the four inside corners of unit), to prevent the chain from slipping off.
Hang your stemware and enjoy
E Mail Us With The Dimensions You Desire And We'll Quote You A Price...
