Just About All The Glass Rack
Pictures On Our Site
Were Taken By Our Customers.
Our Stemware Racks Are Pneumatically Fastened
With Galvanized Hot Dipped Fasteners,
As Well As Glued And Screwed.
You Can Rest Assured
That Your New Glass Rack
Will Provide Years
Of Trouble Free Service.
Pre-drill holes through the end slats to accept your threaded rod.
(You'll have to remove the screws in the end slats first)...
Place threaded rod through the end slats and secure to ceiling.
You can do this with your
Under Cabinet type units too!
Under Cabinet Units Suspended
Tap Or Click To Enlarge!
This is also advantageous if your unit is
going to be used commercially or frequently.
Your servers won't need to steady the hanging rack with one hand,
because securing it with threaded rod makes it stationary.